manualshive.com logo in svg

HermanMiller Embody 100210688, Manual

Share
Download
HermanMiller Embody 100210688 Manual Download Page 65

©

2008 Herman Miller, Inc., Zeeland, Michigan  Printed in U.S.A.

™

L

, 

Z

, 

Y

, Embody, are trademarks of Herman Miller, Inc.

 

 Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make  

         changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YHY REV B

Bolts

Install the lower back bolts using t-40 torx 
wrench (90 in/lbs)

27

Install lower spine bolts using t-40 torx 
wrench (90 in/lbs)

28

29

 Insert the Back Angle Knob into the Spine 
by sliding it into the slot as shown. Make 
sure the Knob is fully engaged by pushing it 
in as far as possible. Verify that the knob is 
securely seated by striking the end of the 
Knob with either the palm of your hand or a 
rubber mallet.

Summary of Contents for Embody 100210688

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands