HellermannTyton Autotool CPK hybrid, Operating Instructions Manual

Page: 37 / 47

Operating Instructions • CPK hybrid • 11-2021 • v04 • 106-29004
Maintenance
37
11 .2 Accessories and extras
Accessories and extras can be ordered directly from your
national HellermannTyton representative,
à separate
spare parts list.
Name
Article number
Power pack CPK 106-00100
Bench mount kit CPK 106-00040
Overhead suspension CPK 106-00050
CPK safety warnings 106-29003
Power cable, 1 .8 m 123-90040
Connecting cable, 2 m 123-90052
Name
Article number
Smart cable 123-90142
CPK hybrid Autotool battery pack 106-006020
CPK hybrid Autotool charger 106-006021
11 .3 Servicing by manufacturer
It is advisable to have the CPK hybrid serviced by
HellermannTyton once a year or after every approx.
1 million bindings. This will allow the CPK hybrid to be
checked and updated to the latest modification status.
Service contact addresses for all countries are posted on
the website:
www.HellermannTyton.com
11 .4 Maintenance schedule
WHEN? WHO? WHAT AND HOW?
Approx. every 50,000 bindings Setup specialist f Check the tie advancer; replace if necessary, à "Checking
tie advancer" on page 38 .
Approx. every 300,000 bindings Setup specialist
f Check the front cap; replace if necessary, à "Checking
front cap and position of cutter" on page 38 .
11 .5 Repair
NOTE
Always perform a reset before commencing repair work,
à
"Performing a reset" on page 32.
11 .5 .1 Checking upper jaw
1
2
f Check upper jaw
2
and upper jaw guide
1
for wear and
chipping.
f If necessary, replace upper jaw, à "Replacing upper jaw"
on page 37 .
11 .5 .2 Replacing upper jaw
f Switch the power pack OFF.
1
f
Remove the screws
1
.
2
3
4
f Use a screwdriver to pry the upper jaw
2
apart
(approx. 3 mm) at the top.
f
Work the upper jaw
2
down and to the side past the
lower jaw
4
.