HellermannTyton Autotool CPK hybrid, Operating Instructions Manual, Page: 33 / 47

Operating Instructions • CPK hybrid • 11-2021 • v04 • 106-29004
Troubleshooting
33
DISPLAY MESSAGE POSSIBLE CAUSE SOLUTION
1. Operate bandoleer cutter
2. Open gate
Error, start position
1. Remove cable-tie residues
2. Press Reset button
Error, start position
Close gate
Error, start position
• The CPK hybrid is not in the
start position.
f Push actuator for bandoleer cutter to the left.
f Open the gate.
;
Error, start position
appears as the next
message on the display.
f
If applicable, carefully remove the cable-tie residues.
f Press the Reset button.
;
Error, start position
appears as the next
message on the display.
f Close the gate.
1. Operate bandoleer cutter
2. Open gate
Position of tie advancer
• No tie advancer present.
• The tie advancer is faulty.
f
Push actuator for bandoleer cutter to the left.
f
Open the gate.
;
Position of tie advancer
appears as the
next message on the display.
Position of tie advancer
1. Press Reset button
2. Check position of tie advancer
f If applicable, carefully remove the cable-tie residues.
f Press the Reset button.
f
Open the roller block, à "Checking tie advancer" on
page 38 .
f Check the tie advancer; replace if necessary.
;
Position of tie advancer
appears as the
next message on the display.
Position of tie advancer
Close gate
f Close the gate.