Operating Instructions • CPK hybrid • 11-2021 • v04 • 106-29004
Transport, disposal and storage
12
4
Transport, disposal and storage
4 .1 Transporting the device
f
Always use the case that comes with the device to
transport the CPK hybrid.
4 .2 Disposal
End-of-life (EOL) disposal of the device and individual
subassemblies and the disposal of consumables and
auxiliaries are subject in part to statutory regulations.
Detailed information is available on request from the
appropriate authorities (e.g. regional or national water
boards or environmental authorities).
f
Dispose of packaging materials.
Always dispose of packaging materials in accordance with
the currently valid materials-disposal and environmental
protection regulations.
f
Always take materials for disposal to certified collection
points.
f
Contact the manufacturer if there is any uncertainty
regarding disposal.
4 .3 Storage
f
Store the tool, power pack and battery pack in a cool,
dry place.
f
Avoid direct sunlight.
f
Store the tool, power pack and battery pack with
charger in dust-proof packaging.
f
Store electrical components (tool, power pack and
battery pack with charger) in impact-absorbing
packaging and separately from the accessories.
f
Observe the corresponding data sheets for storage and
packaging of the accessories as well as the battery pack
with charger.
5
Installation
5 .1 Installing the accessories
f
Always proceed in accordance with the instructions
supplied with the accessory in question.
5 .2 Connecting the power pack
In mains operation, the CPK hybrid is supplied with
power from the power pack.
In:
Last T
ie
Out:
Error
Out:
Busy
Serial
port
1
2
f
Connect power pack
2
to power-supply outlet
1
.
Data
Signal
Power
Pow
er p
ack C
PK
3
2
f
Use connecting cable
2
to connect the power pack to
tool CPK hybrid
3
.
5 .3 Connecting the battery pack
In mains-independent operation, the CPK hybrid is
supplied with power from the battery pack.
2
1
f
Press in the locking button
1
and slide the cover
2
out
towards the front of the CPK hybrid.
f
Push in the battery pack in place of the cover
2
until the
latch engages.
;
After switching on the CPK hybrid, the display shows the
battery charge status,
"Settings in the display menu"
.
