HellermannTyton Autotool CPK hybrid, Operating Instructions Manual

Page: 36 / 47

Operating Instructions • CPK hybrid • 11-2021 • v04 • 106-29004
Maintenance
36
5
f Turn the drum
5
past the point of indexing resistance
and remove the cable-tie residues.
f Close the left and right service flaps.
f
Switch the power pack ON.
f
Close the gate.
f Load a new cable tie bandoleer, à "Loading cable ties"
on page 13 .
10 .4 .2 Changing the battery of the power pack
DANGER
A hazardous electrical current flows though the body
in direct or indirect contact with electrically live parts .
Electric shock, burns or death can result.
f
Work on the electrical supply and on parts that are live
when the device is in operation should always be carried
out by a trained electrician.
f
Use only OEM fuses of the specified amperage.
f Have faulty electrical components replaced immediately.
f Always disconnect the plug from the power-supply outlet
before starting maintenance work and troubleshooting.
f Check the electrical equipment of the device at regular
intervals. Have defects such as loose connections or
scorched wiring repaired immediately.
f Switch the power pack OFF.
f Disconnect the power cord from the power-supply
outlet.
Data
Signa
l
Pow
er
Pow
er p
ack C
PK
2
1
1
f
Remove the cover screws
1
.
f Remove housing
2
from the power pack.
3
f Change back-up battery
3
.
For details of battery type, à "Power pack CPK" on
page 42
f
Position the housing
2
and affix using the cover
screws
1
.
10 .4 .3 Updating the tool firmware
The tool firmware update must be carried out with the
smart cable in mains-independent mode,
à "Accessories
and extras" on page 37.
f Connect the smart cable to the tool and the PC.
f The new firmware is loaded onto the PC à "Update
menu" on page 25.
f Transfer and install the firmware.
11 Maintenance
11 .1 Important notes
Regular servicing is essential in order to ensure that the
device remains in safe working order,
à "Maintenance
schedule" on page 37 .
CAUTION
Crush hazard when jaws close .
f
Do not insert fingers between upper and lower jaws and
do not keep your finger on the trigger.
f Always keep the power pack switched OFF while
maintenance is in progress.
CAUTION
Crush hazard due to moving/rotating parts when service flaps
are open.
f Do not insert fingers underneath the drum and do not
keep your finger on the trigger.
f
Always keep the power pack switched OFF while
maintenance is in progress.