HEIDENHAIN TNC 426 B User Manual Download

Page: 64 / 362

4 Programming: Fundamentals of NC, File Management,

Programming Aids, Pallet Management

Additional Functions

Protecting a file/Canceling file protection

Move the highlight to the file you want to protect.

To select the additional functions, press the MORE
FUNCTIONS key.

To enable file protection, press the PROTECT soft key.
The file now has status P.

To cancel file protection, proceed in the same way using the
UNPROTECT soft key.

Converting an FK program into HEIDENHAIN conversational
format

Move the highlight to the file you want to convert.

To select the additional functions, press the MORE
FUNCTIONS key.

To select the converting function, press the CONVERT
FK->H soft key

Enter the name of the destination file.

To execute conversion, press the ENT key.

Erase a directory together with all its subdirectories and files.

Move the highlight in the left window onto the directory you want
to erase.

To select the additional functions, press the MORE
FUNCTIONS key.

Press DELETE ALL to erase the directory together
with its subdirectories.

To confirm, press the YES soft key;
To abort erasure, press the NO soft key.

4.4 File Manag

ement with

dditional F

unctions

Ekap4.pm6

30.06.2006, 07:03

www.EngineeringBooksPdf.com

Summary of Contents for TNC 426 B











































































































































































































































































































































































Search results

Summary of Contents for TNC 426 B

Reviews:

Related manuals for TNC 426 B

Brands by name

Popular brands

HEIDENHAIN TNC 426 B, User Manual

Search results

Summary of Contents for TNC 426 B

Reviews:

Related manuals for TNC 426 B

Brands by name

Popular brands