HBM HBK S2M, Mounting Instructions, Page: 9 / 124

7
S2M
SCOPE OF SUPPLY AND EQUIPMENT VARIANTS
3 SCOPE OF SUPPLY AND EQUIPMENT VARIANTS
S
S2M force transducer
S
Mounting instructions
S
Manufacturing certificate
Accessories (not included in the scope of supply):
S
Knuckle eye for S2M (all capacities): ordering number 1-U1R/200KG/ZGW
Equipment variants
All force transducers are available in the following versions:
1. Cables
The standard version of the S2M is equipped with a 6 m long cable. You can also or­
der the force transducer with the following cable lengths:
- 1.5 m (option 01M5)
- 3 m (option 03M0)
2. Plugs
We can fit one of the following plugs to the S2M on request:
- D-SUB connector, 15-pin: a 15-pin plug for connection to numerous amplifier sys­
tems, e.g. MGCplus, Scout, MP85, etc. (option F)
- D-SUB HD connector: a 15-pin plug for connection to appropriate amplifier systems,
e.g. the HBM QuantumX system (option Q)
- 3106 PEMV connector (Greenline): for connection to appropriate amplifier systems,
e.g. MGCplus with AP03. (option N)
- ConP1016 connector, 14-pin, for connection to the Somat XR measurement system.
- Free ends: transducer delivered without plugs
3. TEDS
You can order the force transducer with transducer identification ("TEDS"). TEDS
(Transducer Electronic Data Sheet) allows you to store the transducer data (character­
istic values) in a chip that can be read out by a connected measuring device (with an
appropriate amplifier). HBM records the TEDS data before delivery so that no para­
meterization of the amplifier is necessary. TEDS can only be fitted in the plug of the
S2M, therefore it is not possible to equip the "free cable ends" version with TEDS