HappyJapan HCR3E Series, Instruction Book

Page: 88 / 330

-DA -65
9-3
SEWING
9_3 R801
Moving the hoop while embroidering and then returning to the correct location
1. Stop the sewing by pressing the while
embroidering.
2. Press and move frame with
.
3. Press .
The frame will automatically return to the current
sewing position.
縫縫縫縫縫縫縫縫
1. 矢印ボタン（上下左右）を押して刺繍枠を
柄データの原点にあわせます。
2. 開始ボタンを押します。
刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺 5-2
刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺
刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺
刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺
3. “>>Trace end” と表示して、刺繍枠が停止
します。
刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺刺
4. 開始ボタンを押します。
刺刺刺刺刺刺刺刺刺刺
5. 刺繍が終了すると “>>End” と表示され機械
が停止します。
Moving back to the starting point (Origin)
The frame returns to the origin point (beginning position of design).
1. Press and press .
The frame will move to the origin point and the
pattern data will return to the start point.
(Top) will be shown on the display.
If you would like the frame to be restored
to the previous state of origin point (before
pressing
), press again.
(Top) will be cleared on the display.
2. Press .
>>Stop Switch
CAUTION: To prevent accidents.
The frame moves quickly.
Keep hands away from the frame.
CAUTION: To prevent accidents.
The frame moves quickly.
Keep hands away from the frame.
Pointer
4. Press .
Pointer