HappyJapan HCR3E Series, Instruction Book

Page: 21 / 330

-R3 -21
THE CONTROL BOX
3_8b PB30
3-3b
MENDING
THREAD
BREAK
DETECT.
ON
OFF
JUMP
FWD
START
CUT
STOP
13
14
12
9. Forward button
Press once The frame moves forward
one stitch.
Press continuously The frame will move forward
continuously.
Keep pressing The “Key lock” is activated
and the button’s function is
locked.
The frame will move forward
by 1 stitch continuously.
When you stop it, push this
button again or Push the
“STOP” button.
Pressing longer still The “Fast forward” is activat -
ed and the button’s function
is locked.
The frame will move forward
by 10 stitches continuously.
When you stop it, push this
button again or Push the
“STOP” button.
The “Key lock” function will be activated after set -
ting through “Machine Setting” menu. 15-2
10. Start button
This button starts the machine.
When pressed, while the machine is running, run -
ning, the machine will switch to “inching”. (Super
slow speed)
The Machine will return to the previous speed
when button is released.
If you use the inching function for an extended
length of time, the stitch quality may be influ-
enced.
11. Stop button
This stops the machine.
When the STOP button is pressed while the Start/
Stop button is blinking (green color), the following
will take place depending on the manner pressed:
Press once ................ Frame moves back one
stitch.
Press continuously .... The frame will move back -
wards continuously.
Keep pressing. .......... The “Key lock” is activated
and the button’s function
is locked. The frame goes
back by 1 stitch at a time
continuously. When you
stop it, push this button
again or Push the forward
button.
Keep pressing longer still .. The “Fast forward” is activat -
ed and the button’s function
is locked. The frame goes
back by 10 stitches at a
time continuously.
When you stop it, push this
button again or Push the
forward button.
The “Key lock” function will be activated after
setting through “Machine Setting” menu. 15-2
12. Thread break detecting switch
This switch by its position will make the machine as
follows:
ON ....................... This switch is normally at this
position. Function of thread
break detection works.
When thread break or frayed
threads occurs, thread break
lamp blinks and the machine
stops..
OFF ..................... Function of thread break detec -
tion doesn’t work .
Individual jump .... Head with its switch lowered
becomes jump and the machine
doesn’t embroider .
13. Mending switch
When you press this switch with the machine in
non-operation (including automatic stop by thread
break detection), the machine becomes same state
as it stops by thread trouble regardless of actual
trouble or not, and thread break lamp lights.
With thread break lamp being lit, return the frame
with *trace back to position where you want to
mend.
When you press this switch and start the machine,
it will mend portion not embroidered. 9-7b
When you stop the machine manually, there
is a case that thread break lamp doesn’t
light even if you press this switch, however
mending is conducted.
14. Thread break lamp
When threads break, lamp blinks.
Blinking red .. Indicates the upper thread has
broken or the Bobbin thread has run
out.
Orange ........ Indicates the machine is under
mending process. 9-7b