HappyJapan HCR3E Series Instruction Book Download Page 184

Page: 184 / 330

-RA -42

OPTIONAL DEVICE SETTING

15-6

5_3c P801

1. When the machine is stopped, press

2. Select “OPTION”.

3. Select

4. Select setting item and change its setting.

Press

to reset all the sequin settings to

default.

When the optional device is mounted to the machine, setting at the embroidery machine is

required.

Concerning the details of setting, please refer the instruction manual of each device.

In case the embroidery machine has no optional device, please skip this page.

Press to return to Menu mode.

Press to return to Drive mode.

Summary of Contents for HCR3E Series











































































































































































































































































































































Search results

Summary of Contents for HCR3E Series

Reviews:

Brands by name

Popular brands

HappyJapan HCR3E Series, Instruction Book

Search results

Summary of Contents for HCR3E Series

Reviews:

Brands by name

Popular brands