HappyJapan HCR3E Series Instruction Book Download

Page: 102 / 330

-DE -113

9-Cd

POSITION / BOBBIN CHANGE ALERT

16_2 U801

3. Remove the bobbin and check the

remaining amount.

When the remaining amount is suitable, it is

no need to correct the value.

Please continue embroidery.

The correction of setting value is required

when the remaining amount is overage or

shortage.

Go on to step 4.

4. Press

“Frame forward”.

5. Press

6. Press

7. Reduce the setting vale when the bobbin is

almost empty.

Increase the setting vale when the

remaining amount is too much.

The total stitch number which is calculated after

the last bobbin exchange is displayed as “Current

value”.

Please refer the “Current value” to find suitable

setting.

8. Press

and

9. Press

to return to Drive mode.

Please note that several corrections may be

required to find suitable setting.

Summary of Contents for HCR3E Series











































































































































































































































































































































Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands

HappyJapan HCR3E Series, Instruction Book

Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands