HappyJapan HCR3E Series Instruction Book Download

Page: 266 / 330

-DA -149

23-2

MAINTENANCE

23_2 O901

Cleaning the rotary hook

If the rotary hook is clogged with waste thread

or dust, it will degrade the stitch quality of the

embroidery or may cause other problems.

For a long sewing life, please keep the rotary

hook clean.

Use the included brush for cleaning the hook.

Cleaning the thread cutting knife

If the thread cutting knife is clogged with waste

thread or dust, the knife will not work correctly.

Please keep the thread cutting knife and device

clean.

1. Remove set screw (2 pieces) by offset

driver and remove the needle plate.

2. When the machine is stopped, press

and Press

”OTHER”.

3. Press

Summary of Contents for HCR3E Series











































































































































































































































































































































Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands

HappyJapan HCR3E Series, Instruction Book

Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands