HappyJapan HCR3E Series Instruction Book Download

Page: 57 / 330

-RA -38

5-C

PREPARATION OF PATTERN DATA

5_C O512

5. Press

6. Push "OK" to delete.

The item will be deleted.

To delete other patterns, repeat steps 3 to 6.

Press “Cancel” to cancel the delete.

The display will return to step 2.

Delete pattern? < 2>
Cancel OK

Showing number of delete design(s)

Press

to return to Menu mode.

Press

to return to Drive mode.

Erasing all patterns from memory

This is to erase alldesign data from the machine memory.

Pattern data can be erased if the lock is set.

1. When the machine is stopped, press

Please note that this function can not be

activated through "PATTERN" icon at

"Quick menu".

In this case, open normal ÅgMENUÅh by

pressing

and follow the procedure

as below.

2. Select "PATTERN" while pressing the

and

3. Press

The item will be deleted.

Summary of Contents for HCR3E Series











































































































































































































































































































































Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands

HappyJapan HCR3E Series, Instruction Book

Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands