HappyJapan HCR3E Series Instruction Book Download

Page: 209 / 330

-S3 -113

6. Press

7. Press

The display returns to MENU.

9. Press

The machine will automatically connect with

HAPPY link LAN booted on the PC.

LAN connection indicator is displayed.

If LAN connection indicator is not displayed in

the screen, refer to the following causes and

countermeasures.

18-2d

OTHER SETTINGS

18_2c U901

LAN connection indicator

Causes and countermeasures

Is IP address overlapped on the machine with other machine that creates LAN

connection?

If so, set IP address so that IP Address on each machine is not overlapped.

“HAPPY link LAN” is not booted.

If not booted, boot “HAPPY link LAN” on the PC. LAN is not recognized before HAPPY

link LAN is booted.

Is IP Address in “HAPPY link LAN” set correctly?

Set up the IP Address correctly based on the “HAPPY Link LAN” manual.

Are PC network settings set correctly? Set up the PC network settings correctly based

on the “HAPPY Link LAN” manual.

Summary of Contents for HCR3E Series











































































































































































































































































































































Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands

HappyJapan HCR3E Series, Instruction Book

Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands