HappyJapan HCR3E Series Instruction Book Download

Page: 104 / 330

-DA -111

9-Cf

POSITION / WORK SAVE, WORK READ

16_2 S201

1. Press

”Frame forward”.

2. Press

"Load”

Press

The saved working design's state and

the selected frame type are loaded, and

restore it to the state before suspend

sewing.

"Read” return to

"Save”.

Reading is cancelled

and

delete the

saved state of working design etc.. (The memory

design will not be deleted.)

Reading is cancelled.

4. Press

to return to Drive mode.

Load

Loads the saved working design's state and the selected frame type, and restore it to the state

before suspend sewing.

Saved time

Selected frame

Number of stitches

sewn up to now

Stitches of pattern

CAUTION: To prevent accidents.

The frame moves quickly.

Keep hands away from the frame.

Saved working

design

Summary of Contents for HCR3E Series











































































































































































































































































































































Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands

HappyJapan HCR3E Series, Instruction Book

Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands