HappyJapan HCR3E Series Instruction Book Download

Page: 158 / 330

-D2 -83

-1

PATTERN SETTINGS

12_1 N525

Various settings such as the scaling, repeat sewing, offset and frame out can be applied to a

pattern.

Adjust

This menu contains settings such as scaling, width adjustment, angle and convert design.

Repeat sewing

The machine repeats the pattern a number of times in the X and Y directions as set by the user.

Offset

Sets the start point of the frame in the selected pattern.

Frame out

Inserts a frame out command in the selected pattern.

Various settings are executed in assortment.

Adjust

Scaling

This adjusts the scale of the selected pattern.

Width adjustment

This adjusts the width of the selected pattern.

Angle

This adjusts the angle of the selected pattern.

Convert design 9-5

This sets the rotation of the selected pattern in increments of 90 degrees, normal or reversed.

Summary of Contents for HCR3E Series











































































































































































































































































































































Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands

HappyJapan HCR3E Series, Instruction Book

Search results

Summary of Contents for HCR3E Series

Reviews:

Related manuals for HCR3E Series

Brands by name

Popular brands