Section 3: Programming
Operator Manual
T
4000™
(Rev 1)
© Hantle 2010
3.27
3.4.6 GRAPHICS
The Hantle
T
4000™ is capable of displaying up to 8 individual graphic screens and 8
individual banner graphics. These graphic files are created on a computer and then
downloaded into the ATM either directly at the ATM using a SDRAM card or by using
the Hantle Remote Management Software (TranRMS). When the advertisements are
loaded and enabled they will rotate in order while the ATM is waiting for a
transaction and also while the transaction is processing. There is a timer, which
allows you to set a delay before switching to the next graphic screen. Please see
Appendix D at the end of this manual for detailed instructions for creating
advertisements.
Step 1
Enter the Graphics menu and choose
“Advertise” enable or disable each
loaded graphic.
In this example, the “banner”
is the strip at the top of the
screen.
“Advertise” refers to the
graphic which appears in the
center portion of the screen.