Section 4: Operation
Operator Manual
T
4000™
(Rev 1)
© Hantle 2010
4.10
4.2.3 Loading the Receipt Paper
Step 1
Open the rear access panel and press the
button to release the slide tray.
There is a shipping screw securing the slide
tray which should be removed during
installation. Please see the installation section
of this manual (Section 2) for location of the
shipping screw.
Paper roll and plastic paper spindle are
included in the “Open Me First” box.
Step 2
The left service panel may be removed to give
easier access to the front of the printer, but is
not necessary.
Step 3
Prepare the new paper roll. Note below.
NOTE:
1.
Make sure the roll is in its proper roll form. (A deformed roll may cause jamming
problems.)
2.
When replacing the new roll, make sure the end of the roll paper is cut straight
.