Section 2: Installation
Operator Manual
T
4000™
(Rev 1)
© Hantle 2010
2.5
Step 6
Once the
T
4000™ is installed in the wall, position it on
the pedestal using the elongated holes so that the
pedestal is as close to the backside of the wall as
possible. Using the included hardware, secure the
pedestal to the
T
4000™.
WARNING
: If the rear portion
of the
T
4000™ is installed in a high risk security area,
you may want to use a security head bolt, or apply a
tack weld to the bolts attaching the
T
4000™ to the
pedestal for added protection.
Next reattach the side braces. The steel side braces are
designed to restrain horizontal movement. They should
not be used as a load bearing bracket.
Step 7
For additional security, the pedestal base
includes holes for anchors. Allow for additional
anchor length if adjustable feet are used in the
pedestal installation.
END
PLEASE SEE END OF MANUAL FOR ADDITIONAL
INSTALLATION INSTRUCTIONS AND SPECS.