Section 3: Programming
Operator Manual
T
4000™
(Rev 1)
© Hantle 2010
3.22
3.4.2 BIN LISTS
BIN numbers are card numbers that you have preset with your processor to not be
surcharged. You must set this up with your processor, who will then give you
numbers to enter in the list. These numbers will reference cards that you wish to
not be charged a surcharge for transactions. The ATM will hold up to 60 numbers,
programmed into the machine directly.
If you need more BIN numbers, there is a file that can be created to load several
thousand more numbers. See Appendix for Extra-BIN instructions.
Step 1
To enter the BIN numbers select BIN List
from the Customer Setup menu. The list
can hold 2 banks of 30 numbers for a total
of 60. Bank 0 and Bank 1. Press the
OTHER button to switch between the banks.
Step 2
To add a number, press ADD and input the
BIN number with the keypad. To remove,
press REMOVE and type in the BIN number
you wish to delete from the list.
Press OTHER to switch between Bank 0 and
Bank 1.
Step 3
If you wish to view the contents of the BIN list, use the Print All Setup report. From
the Operator Function Menu, go to Reports, then Print All Setup. Any numbers
added to the BIN list will be visible from this report.
NOTE:
Numbers loaded via the
extra BIN file will not display on the Print Setup or any other report.
END
