Section 4: Operation
Operator Manual
T
4000™
(Rev 1)
© Hantle 2010
4.11
Step 4
Feed the roll as shown in the picture at left.
The outer side of the paper is the coated or
printing side. Using your finger, insert the
paper up the loading guide until the paper
stops. The paper will not feed until the
machine is initialized (or powered on). If the
paper does not feed, make sure the paper is
all the way in the loading guide. Also make
sure the roller assembly is closed (see below)
Step 5
The roller assembly is located at the front of
the printer on the bottom side. A green
plastic lever is used to open and close the
rollers. Press down on the lever to open the
rollers and up to close them. If error claims
the rollers are open (and yet the lever is up)
press up on the rollers themselves to make
sure they are closed completely.
Step 6
If the printer is feeding paper, however no
printing appears on the receipts make sure the
outer side of the paper is facing up. The
printer can only print on the coated side of the
paper.
END
