Hanna Instruments HI 904, Uick Start Manual, Page: 53 / 180

4-7
GENERAL OPTIONS
4.7 Save Files to USB Storage Device
This option allows the user to save files from titrator to a USB storage device.
On the titrator, the available file types are:
Standard Method Files - HIxxxxyy.MTD (e.g.: HI9001EN.MTD, HI9101EN.MTD)
User Method Files - USERxxxx.MTD (e.g.: USER0001.MTD)
Drift/Titration Report Files - DR_xxxxx.RPT, KF_xxxxx.RPT
(e.g.: DR_00001.RPT, KF_00001.RPT)
Insert the USB Storage Device into the USB port on the left side of the titrator.
Use the and keys to switch between the 3 file types. The number of files and each file
name on the titrator will be displayed.
Use the and keys to scroll through the list.
The option keys allow the following operations:
Returns to the
General Options
screen
Copies the highlighted file from titrator to a USB storage device
Copies all currently displayed files from titrator to a USB storage device
Deletes the highlighted file.
Deletes all currently displayed files.
The status of the transfer (“successful” / ”unsuccessful”) and the file name of the currently
processed file are displayed during copying or deleting.
Note: The saved files will be stored on the USB Key in the HI 904 folder, as follows:
- Methods: USB Drive: \ HI 904 \ Methods \ *.mtd
- Reports: USB Drive: \ HI 904 \ Reports \ *.rpt