manualshive.com logo in svg

Hand Held Products Dolphin 7900, User Manual

Share
Download
Hand Held Products Dolphin 7900 User Manual Download Page 74

7 - 8

Rev D

Dolphin® 7900 Series User’s Guide

CPU Speed

This system setting enables you to see and change the current speed of the Central Processing Unit (CPU). 

The default is 

High Speed

 at 400MHz. 

Low Speed

 is 200MHz. 

To change the default, select Low Speed and tap 

OK

. A message appears confirming the new CPU speed.

Tap 

OK

 to save the change.

Memory

The Memory system setting enables you to review and manage both RAM (volatile) and IPSM/Storage Card (non-volatile) 
memory. Access this system setting whenever you receive system messages about memory.

There are three tabs: Main, Storage Card, and Running Programs.

Main

 tab

This tab displays current capacity and usage of the 64MB of on-board, volatile RAM memory. This is 
the memory used for running and storing programs as well as storing program data. 

Field Description

Total main memory

The total memory capacity of current RAM memory.

Storage

 

The part of RAM memory used for storing programs and program data.

Program

 

The part of RAM memory used to run programs.

Fields Under Storage and Program

Allocated

Displays the current MB of memory allocated for Storage and Program use.

In use

Displays the total MB of that allocated memory being used in Storage and Program memory 
functions.

Free

Displays the total MB of memory available for Storage and Programs use.

To Increase/Decrease RAM Memory

To increase Program or Storage memory, tap, hold, and drag the slider away the kind of memory you want to increase. The three 
fields adjust automatically; Program memory decrease when you increase Storage memory and vice versa.

Summary of Contents for Dolphin 7900



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands