manualshive.com logo in svg

Hand Held Products Dolphin 7900, User Manual

Share
Download
Hand Held Products Dolphin 7900 User Manual Download Page 191

Dolphin® 7900 Series User’s Guide

 Rev D

12 - 7

Notes

Quickly capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. If a note is open when you create the 
recording, it will be included in the note as an icon. 

Creating a Note

1. Tap 

New

.

2. Type your note using the SIP or the Dolphin keyboard.

Messaging

Use Messaging to send and receive e-mail messages; this is your email Inbox. To use e-mail, you can: 

•           Synchronize e-mail messages with Microsoft Exchange or Microsoft Outlook on your desktop computer.
•           Send and receive e-mail messages by connecting directly to an e-mail server through an ISP or a network.

Synchronizing E-mail Messages

E-mail messages can be synchronized as part of the general synchronization process. You need to enable Inbox synchronization 
in ActiveSync. For information on enabling Inbox synchronization, see ActiveSync Help on the desktop computer.

During synchronization:

Summary of Contents for Dolphin 7900



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands