manualshive.com logo in svg

Hand Held Products Dolphin 7900, User Manual

Share
Download
Hand Held Products Dolphin 7900 User Manual Download Page 152

10 - 18

Rev D

Dolphin® 7900 Series User’s Guide

Exit Bluetooth File Explorer

To exit the Bluetooth File Explorer, tap 

File

 > 

Exit

. 

 Receive Contact or File

1. Tap on the 

Bluetooth

 icon. In the pop-up menu, tap 

Transfer via Bluetooth

 > 

Receive Contact or File

.

2. The Receive Contact or File status screen appears. Your device waits two minutes for the contact or file.

3. After successfully connecting to the remote device, the screen reports Connected then disappear. The new contact or file 

should now be on your device.

4. If two minutes passes before you receive the item, tap 

Wait Again

.

5. After you receive the file or contact, the “Receive Contact or File” feature is automatically disabled.

Enable File Sharing

1. Tap on the 

Bluetooth

 icon. In the pop-up menu, tap Transfer via 

Bluetooth

 > 

Enable

 

File

 

Sharing

.

2. The Enable File Sharing status screen appears. Your device waits two minutes for the remote device to connect.

3. After successfully connecting to the remote device, the screen reports that you are connected.

4. If two minutes passes before you connect, tap 

Wait Again

.

5. File sharing is enabled until you end it by tapping 

Cancel

.

Using the Dialer

This section explains how to assign a dialing prefix and use the Dialer to dial a number directly from your Contacts list. The Dialer 
makes it quick and easy to perform dial-up networking.

Note: The Dialer has been verified to work with Nokia and Ericcson phones and is known not to work with the Motorola 270c, 

NTT Docomo Paldio 633S or Sony au C413S phone. Results may vary with other phones that are not listed as being 
supported by the Bluetooth system.

Summary of Contents for Dolphin 7900



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands