manualshive.com logo in svg

Hand Held Products Dolphin 7900, User Manual

Share
Download
Hand Held Products Dolphin 7900 User Manual Download Page 40

3 - 14

Rev D

Dolphin® 7900 Series User’s Guide

Operating 
Temperature:

14 to 122°F (-10°C to 55°C)
The terminal can operate in temperatures lower than -20°C with potential degradation in 
performance depending on the application.

Storage 
Temperature:

-22 to 176°F (-30°C to 80°C)

Humidity: 

95% humidity, non-condensing

ESD:

15 KVA on all surfaces

Impact Resistance:

Withstands multiple 5ft (1.5m) drops onto concrete 

Environmental 
Resistance:

Independently certified to meet IP64 standards for moisture and particle resistance

Power:

Lithium-Ion battery technology, 7.4V, 14.8 watt-hour main battery with hot-swappable design for 
fast replacement in the field

Other:

Integrated stylus with optional tether and adjustable, removable hand strap 

Peripherals/Accessories

Dolphin HomeBase

Charging/communications cradle with auxiliary battery well. Data transfer via RS-232 serial or USB 
ports. 

Dolphin Mobile Base 

Mobile charging/communication cradle. Data transfer via RS-232 serial. Power out 5 volts for 
peripheral devices.

Dolphin 
QuadCharger

Four-slot battery charger that charges four batteries in under four hours. One slot doubles as a 
battery analyzer.

Dolphin Mobile 
Charger

Charges a Dolphin terminal by plugging into a vehicle cigarette lighter/power port.

Dolphin Net Base

Four-slot charging/communication cradle designed for Ethernet-based communications.

Dolphin ChargeBase

Four-slot charging cradle that holds, powers, and charges a terminal in each slot.

Dolphin Cable Kits

USB or serial cables that charge and communicate with the terminal directly, without a cradle. 

Li-Ion Battery Pack

7.4V, 14.8 watt hour Li-ion rechargeable main battery for the Dolphin.

Regulatory Approvals

FCC-CE-Radio 
Country: 

US/Canada, R&TTE

Dolphin 7900 Technical Specifications

Summary of Contents for Dolphin 7900



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands