manualshive.com logo in svg

Hand Held Products Dolphin 7900, User Manual

Share
Download
Hand Held Products Dolphin 7900 User Manual Download Page 147

Dolphin® 7900 Series User’s Guide

 Rev D

10 - 13

4. If your device has no devices in the Bluetooth Devices Folder, then it begins to search for Bluetooth devices nearby.

5. Select the Bluetooth device you wish to send the contact(s) to. If the desired device is not listed, tap 

Find

.

6. Your device processes and sends the contact(s).

Send a File

1. Make sure the other Bluetooth device can receive a file; that device must support the OBEX Object Push server profile. 

Note: If the other device is also using the Bluetooth Connection Kit, you can set it up to receive a file by tapping the Bluetooth 

icon. In the pop-up menu, tap Transfer via Bluetooth > Receive Contact or File.

2. Now you are ready to send a file. Tap the 

Bluetooth

 icon. In the pop-up menu, tap 

Transfer via Bluetooth

 >

 Send a File

.

3. If your device has no devices in the Bluetooth Devices Folder, then it begins to search for Bluetooth devices nearby.

Summary of Contents for Dolphin 7900



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands