manualshive.com logo in svg

Hand Held Products Dolphin 7900, User Manual

Share
Download
Hand Held Products Dolphin 7900 User Manual Download Page 209

Dolphin® 7900 Series User’s Guide

 Rev D

13 - 5

Charging the Main Battery

The Dolphin HomeBase powers the terminal and fully charges its main battery pack in less than four hours. To check battery 
power, see 

Power

 on page 

7-10.

 

To Power a Terminal and Charge its Main Battery

1. Install the battery pack in the terminal; see 

Install the Main Battery Pack

 on page 

2-5.

2. Power the HomeBase; see 

Powering the Dolphin HomeBase

 on page 

13-4.

3. Slide the terminal into the terminal well until the Dock LED lights green to indicate that the terminal is properly seated.

4. The battery pack begins charging. 

Charging a Spare Battery in the Auxiliary Battery Well 

The auxiliary battery well located on the back panel (

Auxiliary Battery Well

, page 13-3) charges a spare battery. The 

AUX Battery 

LED

 (page 13-2) on the front panel indicates the charge status of the battery in this well. Charge time is less than four hours and 

the charge process is independent of the terminal well. 

1. Insert the end of the battery without the locking tab into the bottom of the auxiliary well opening.

2. Snap the battery into place with a hinging motion. The Aux Battery LED lights orange.

3. The AUX Battery LED monitors the charge progress.

Summary of Contents for Dolphin 7900



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands