manualshive.com logo in svg

Hand Held Products Dolphin 7900, User Manual

Share
Download
Hand Held Products Dolphin 7900 User Manual Download Page 23

Dolphin® 7900 Series User’s Guide

 Rev D

2 - 7

2. The terminal initializes and the splash screen appears for a few seconds. The Build numbers indicate the software versions.

3. The system performs a hard reset. When the display activates again, follow the instructions that appear.

Step 5.  Align the Screen 

You are prompted to align the screen by tapping the target five times. Use the stylus provided by Hand Held Products. 

•           Alignment should always be performed with a stylus designed for touch screen applications. The small point is required for 

accurate calibration.

•           Press the stylus firmly into the center of the cross-hair target once and release. Do not “double-tap” the target. 
•           You can re-align the screen at any time by going to 

Start

 > 

Settings

 > 

System

 tab > 

Screen

. 

Step 6.  Let Autoinstall Run

For each program that loads, a status bar indicates that the program is loading. Autoinstall occurs after each hard reset. Do NOT 
touch the keyboard or the screen while programs are loading!

All configurations of the Dolphin 7900 terminal install Demos and Power Tools. If the terminal is configured with a wireless radio, 
the appropriate radio drivers and utilities for each radio install.

After Autoinstall is complete, the terminal performs a soft reset automatically. When it finishes booting up after the soft reset, the 
Today screen appears; see 

Today Screen

 on page 

4-1.

Step 7.  Setting the Time and Date

The time and date need to be reset after every hard reset of the terminal. It is a good idea to set the time and date before you 
begin using the device, so that the system clock is accurate. 

Bootloader

Kernel

Keyboard

Summary of Contents for Dolphin 7900



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands