manualshive.com logo in svg

Hand Held Products Dolphin 7900, User Manual

Share
Download
Hand Held Products Dolphin 7900 User Manual Download Page 140

10 - 6

Rev D

Dolphin® 7900 Series User’s Guide

2. Tap on the tab for the type of device you would like to set a favorite for. If needed, use the arrow buttons to scroll and find 

the tab you need.

Note: Tabs appears only for COM ports you have enabled. To enable a port, refer to the “Assign COM Ports” section earlier in 

this chapter.

3. To select a favorite device, select 

Use the favorite selected above

. In the drop-down list, select your device. Tap 

OK

.

4. After setting a device as your favorite, its icon appears in the Bluetooth Devices folder with a heart next to it.

Change Views

You can switch between the 

Large Icons

 or 

Details

 views for the 

Bluetooth Devices

 folder.

1. In Bluetooth Devices, tap on 

View

.

2. In the pop-up menu, choose between 

Large Icons

 or 

Details

.

Note: In Details view, you can see the Device Class and scroll right to see the current Bonded status.

Delete a Device From the Folder

If you no longer plan to connect with it, you can delete a device from the

 Bluetooth Devices 

folder. 

1. If not open, launch the 

Bluetooth Devices

 folder.

Large Icons

Details 

Summary of Contents for Dolphin 7900



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands