manualshive.com logo in svg

Hand Held Products Dolphin 7900, User Manual

Share
Download
Hand Held Products Dolphin 7900 User Manual Download Page 170

11 - 12

Rev D

Dolphin® 7900 Series User’s Guide

USSD

Short for Unstructured Supplementary Service Data, (USSD) is a technology unique to GSM that enables session-based text-
messaging as opposed to SMS, which is store-and-send text-messaging. Turnaround response times for interactive applications 
are generally shorter for USSD than SMS. USSD is not currently available on all carrier networks.

USSD communicates with a USSD application portal, a news portal or a chat session with a co-worker. 

Tap 

Tools

 > 

USSD

. 

Send

Sends the text entered in the Message section and begins the USSD session.

End

Ends the USSD session.

Message

Enter text to a USSD portal.

Network message

Displays the USSD message received from the network, allowing a session-based interaction. 

Summary of Contents for Dolphin 7900



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands