SPANNTOP [nova] – Assembly
The maximum actuating force specified on the peri-
meter of the clamping device must not be excee-
ded.
The axial actuating force of the machine must be
sufficiently high.
All mounting tools must be removed from the interi-
or of the machine.
Clamping device and workpiece must be compatible
– check the clamping diameter regularly.
The workpiece must be clamped into the clamping
device with sufficient workpiece tension.
Do a a measurement of clamping force.
6.6 Control of the stroke position
WARNING!
Crushing danger from moving parts!
Crushing danger from moving parts during
controlling the stroke position!
Gaps, caused while controlling the stroke posi-
tion, can cause severe injury.
Only do the controlling of the stroke position
with assembled changing parts.
Only run the machine in set-up mode or jog
mode.
Do not reach into moving parts or handle mo-
ving parts during operation.
Note the gap dimensions of moving parts.
Wearing of gloves / [PSA] is required!
6.7 Activities after production is concluded
3. x
1. Move the clamping device into unclamped positi-
on.
2. Switch off the machine tool and safeguard it from
being switched on again.
3. Open the protective door or hood.
4. Clean the clamping device and a possibly moun-
ted add on clamping device and adapter of chips
and production residues using a soft, lint-free cloth
and oil them lightly.
5. Close the protective door or hood.
86
