SPANNTOP [nova] – Assembly
6.2 Preparations
The total weight of the clamping device, consisting of
spindle flange and clamping unit, depends on the size
and can be as much as 65 kg.
The individual weight of the spindle flange can be as
much as 26 kg, and the clamping unit can weigh up to
36 kg [see section »Technical data«].
Depending on the weight, to safely lift the clamping
device out of the package and position it in the machi-
ne it must be hooked into a crane.
WARNING!
Danger of injury due to falling components!
When mounting components can fall and cau-
se severe injury and material damage.
Two people are always required for this task.
Use a crane.
For assembly on a vertically suspended
spindle always use a suitable mounting aid.
6.2.1 Preparing SPANNTOP nova combi deadlength and
SPANNTOP nova combi pull-back clamping devices
4. x
Special tools required:
Allen wrench
Oil stone
Crane and eye bolts from weight 15 kg
Fig. 29
1. Loosen all cylindrical screws [1] in the clamping
device element reception [3] with an allen wrench
[2] and remove them completely.
65
