SPANNTOP [nova] – Safety
For special tasks
wear
Special protective equipment is required when execu-
ting special tasks. Separate reference is made to this
equipment in the specific sections of this manual. This
special protective equipment is explained below:
Hard hat
to protect against falling and flying parts and materi-
als.
Protective goggles
to protect eyes from flying parts and liquid splashes.
Protective gloves
to protect hands from friction, abrasion, puncture
wounds, or deeper injuries, as well as from contact
with hot surfaces.
Haarnetz
zum Schutz der Haare vor Erfassung durch die rotie-
renden Teile der Maschine.
2.5 Special dangers
In the following section residual risks are cited that
occur due to installation of the clamping device in a
machine tool. In each case the residual risks that
have been determined based on a risk analysis of the
machine must be specified by the customer.
Follow the safety instructions listed here and the
warnings in the other sections of this manual to re-
duce health hazards and to avoid dangerous situati-
ons.
Horizontal / lying
parts
WARNING!
Danger of injury due to horizontal parts!
Before transporting the clamping device in ho-
rizontal condition:
Put the clamping device on a non-slip pad.
Screw in the eye bolts.
14
