SPANNTOP [nova] – Assembly
WARNING!
Danger of injury due to vertical suspended
spindle!
Bending into the machine work are when as-
sembling overhead can cause severe head in-
juries.
Secure components prior to overhead as-
sembly.
For assembly on a vertically suspended
spindle always use a suitable mounting aid.
6.3.1 Assembling the flange [optional]
6. x
NOTE!
Material damage due to wrong tightening
torque of the cylindrical screws in the
spindle flange!
The tightening torque of the cylindrical screws
is prescribed by the spindle or machine manu-
facturer. Incorrect tightening torque of the cy-
lindrical screws in the flange can cause signifi-
cant material damage on the clamping device
and on the machine.
Only tighten the cylindrical screws of the
spindle with the torque prescribed by the
spindle or machine manufacturer.
Fig. 34
1. Put the machine in set up mode.
2. Wipe off the mating surfaces of the machine spind-
le with a soft, lint-free cloth and remove all oil and
grease residues.
3. Lift the flange into the machine by hand or with the
aid of a crane and place it on the machine spindle.
Position the flange on the machine spindle with
the aid of the bores.
4. Screw all cylindrical screws into the flange with an
allen wrench and hand tighten in a cross pattern.
5. Now adjust the clamping device, see »Adjusting
the concentricity of the spindle flange«.
69
