SPANNTOP [nova] – Disassembly
WARNING!
Danger of injury due to vertical suspended
spindle!
Bending into the machine work are when as-
sembling overhead can cause severe head in-
juries.
Secure components prior to overhead as-
sembly.
For assembly on a vertically suspended
spindle always use a suitable mounting aid.
Fig. 79
4. Loosen all cylindrical screws [1] with an allen
wrench and unscrew them from the clamping unit.
Fig. 80
5. Vertically suspended disassembly:
Place the assembly plate [illustration is symbolic]
on the tool turret.
In jog mode, move the spindle slowly and care-
fully downward until it touches the clamping unit.
Fig. 81
6. Insert wrench [if necessary through the assembly
plate] into the clamping unit, so that the wrench
engages in the grooves of the adapter.
7. Use the wrench to unscrew the adapter from the
drawtube of the machine, via the adapter thread.
In this process ensure that the drawtube adapter
does not tilt.
93
