SPANNTOP [nova] – Safety
WARNING!
Risk of injury!
By repeated reworking or wear and tear of the
clamping surfaces sharp edges and burrs may
appear and lead to severe cutting damages.
Remove any burr.
If necessary, replace worn parts with original
HAINBUCH spare parts.
WARNING!
Risk of injury!
Escaping [sprayed out] hydraulic oil from adja-
cent machine components can cause serious
personal injuries.
Make sure that all O-rings / seals for the hy-
draulic and/or pneumatic connections are
available and undamaged!
WARNING!
Damage of clamping device!
The clamping device may be released exclusi-
vely in the non-rotating condition!
2.7 Clamping force
The achieved clamping force can vary due to the main-
tenance condition of the clamping device [state of lubri-
cation and degree of contamination] [see chapter
»Maintenance«].
The clamping force must be checked at regular inter-
vals. This requires the use of static clamping force
measuring devices.
CAUTION!
Damages due to excessive draw and com-
pressive force!
An excessive draw force and/or compressive
force may damage the clamping device and/or
the drawtube adapter.
The max. draw force and compressive force
may not be exceeded.
18
