35
Cakes high in middle with
crack on top
•
Oven temperature too high
•
Baking time too long
•
Pans touching each other or oven walls
•
Incorrect rack position
•
Pan size too small
Piecrust edges too brown
•
Oven temperature too high
•
Edges of crust too thin
SOLVING OPERATIONAL PROBLEMS
Before calling for service, check the following to avoid unnecessary service charges.
Oven Problem
Problem Solving Steps
E008 Error appears in
the display window.
A problem with latch mechanism occurred. Remove
power and turn it back on again after a few seconds. The
oven should run a latch auto–test. If condition persists,
note the code number and call an authorized service
center.
Other E Error appears
in the display window.
Remove power and turn it back on again after a few
seconds. If condition persists, note the code number and
call an authorized service center.
The oven display
stays OFF
Turn off power at the main power supply (fuse or breaker
box). Turn breaker back on. If condition persists, call an
authorized service center.
Cooling fan continues
to run after oven is
turned off
The fan turns off automatically when the electronic
components have cooled sufficiently.
Oven door is locked
and will not release,
even after cooling
Turn the oven off at the circuit breaker and wait a few
seconds. Turn breaker back on. The oven should reset
itself and will be operable.
Oven is not heating
Check the circuit breaker or fuse box to your house.
Make sure there is proper electrical power to the oven.
Make sure the oven temperature has been selected.
Oven is not cooking
evenly
Check oven calibration. Adjust calibration if necessary
(see To Set Temperature). Refer to cook charts for
recommended rack position. Always reduce recipe
temperature by 25 °F (15 °C) when baking with
Convention Bake mode.
Oven temperature is
too hot or too cold
The oven thermostat needs adjustment. See Calibrating
Oven Temperature.
Oven light is not
working properly
Replace or reinsert the light bulb if loose or defective.
Touching the bulb with fingers may cause the bulb to
burn out.
Oven light stays on
Check for obstruction in oven door. Check to see if hinge
is bent or door switch broken.
