70
10.13.2 Description of LIMIT measure results
The LIMIT measure procedure results are recorded the same as the screening
luminescence results. The only difference is that the LIMIT measure results include
a column that shows whether the percentage inhibition calculated for each sample
measurement is above the LIMIT value or below the LIMIT value set by the user as
shown in
Figure 5
.
Figure 5 Example LIMIT measure results
10.13.3 Show or send screening luminescence results
To show or send previous results saved on the luminometer for the screening
luminescence procedure:
1.
Push
ON
to apply power to the luminometer.
The luminometer does built-in tests that make sure that the electronics and
software are operating correctly.
2.
When the built-in tests are done, push
PROCEED
.
The Main Menu is shown.
3.
Select LUMINESCENT BACTERIA TEST
and push
ENTER
.
The Luminescent Bacteria Test Main Menu is shown.
4.
Select Previous Results and push
ENTER
.
The Previous Results Menu is shown.
5.
Select Show Previous Screenings and push
ENTER
.
The Previous Screenings Menu is shown.
6.
To show all or send all of the results saved on the luminometer, select one
option:
Summary of Contents for Eclox
