manualshive.com logo in svg

Haas 96-8000, Operator'S Manual

The Haas 96-8000 Operator's Manual is a comprehensive guide that equips users with in-depth knowledge on operating this cutting-edge product. Available for free download on manualshive.com, this manual provides clear instructions, troubleshooting tips, and everything needed for a seamless user experience. Get yours now to maximize productivity!

Share
Download
background image

228

96-8000 Rev AC

May 2010

116 - Pivot Length

Setting 116 is set when the machine is first built and never changed. Only a 

qualified service technician should modify this setting.

117 - G143 Global Offset

This setting is provided for customers who have several 5-axis Haas mills and 

want to transfer the programs and tools from one to another. The pivot length 

difference (difference between Setting 116 for each machine) can be entered 

into this setting, and it will be applied to the G143 tool length compensation.

118 - M99 Bumps M30 CNTRS

When this setting is On, an M99 will add one to the M30 counters (these are 

visible on the Curnt Comnds displays). Note that an M99 will only increase the 

counters as it occurs in a main program, not a sub-program.

119 - Offset Lock

Turning the setting On will not allow the values in the Offset display to be al

-

tered. However, programs that alter offsets will still be able to do so.

120 - Macro Var Lock

Turning this setting On will not allow the macro variables to be altered. How

-

ever, programs that alter macro variables will still be able to do so.

121 - APC Pal. One Load X

122 - APC Pal. One Load Y

123 - APC Pal. One Unload X

124 - APC Pal. One Unload Y

125 - APC Pal. Two Load X

126 - APC Pal. Two Load Y

127 - APC Pal. Two Unload X

128 - APC Pal. Two Unload Y

129 - APC Pal. 1 and 2 Safe X Pos

Settings 121-129 are the pallet positions for the X and Y axis. They are set at 

the time the APC is installed and should not need altering.

130 - Tap Retract Speed

This setting affects the retract speed during a tapping cycle (The mill must have 

the 

Rigid Tapping option). Entering a value, such as 2, will command the mill 

to retract the tap twice as fast as it went in. If the value is 3, it will retract three 

times as fast. A value of 0 or 1 will have no affect on the retract speed. (Range 

0-4)

Entering a value of 2, is the equivalent of using a J code of 2 for G84 (Tapping 

canned cycle). However, specifying a J code for a rigid tap will override setting 

130.

Summary of Contents for 96-8000














































































































































































































































































Reviews:

No comments

Related manuals for 96-8000

3M 980 Instruction Manual preview
980
Brand: 3M Pages: 11
Omega Pro 83012 Manual preview
83012
Brand: Omega Pro Pages: 4
Tanco I75 Operator'S Handbook Manual preview
I75
Brand: Tanco Pages: 26
Taurus BT-CK 18 2B-1.5 Kit Instruction Manual preview
BT-CK 18 2B-1.5 Kit
Brand: Taurus Pages: 40
Fein ABOP6 Original Instructions Manual preview
ABOP6
Brand: Fein Pages: 133
Fein BLK1.3TE Translation Of The Original Instructions preview
BLK1.3TE
Brand: Fein Pages: 148
Fein BLK1.3TE Repair Instructions preview
BLK1.3TE
Brand: Fein Pages: 41
Parkside PSTKA 12 B3 Translation Of The Original Instructions preview
PSTKA 12 B3
Brand: Parkside Pages: 132
M-system 18DY Instruction Manual preview
18DY
Brand: M-system Pages: 3
Ransburg 77070-33 Service Manual preview
77070-33
Brand: Ransburg Pages: 40
Alemite 585 E1 Service Manual preview
585 E1
Brand: Alemite Pages: 66
Avdel 7539-300X Series Instruction Manual preview
7539-300X Series
Brand: Avdel Pages: 47
BGS technic 62672 Quick Start Manual preview
62672
Brand: BGS technic Pages: 4
Delta Elektronika SM 120-50 Manual preview
SM 120-50
Brand: Delta Elektronika Pages: 21
Promac JDT-5030 Operation Manual preview
JDT-5030
Brand: Promac Pages: 41
G-Tec Basic TTCF-6 How To Operate preview
Basic TTCF-6
Brand: G-Tec Pages: 11
CP CP7600xB Series Operator'S Manual preview
CP7600xB Series
Brand: CP Pages: 64
Pulsar PSCC20350 Manual preview
PSCC20350
Brand: Pulsar Pages: 2

Brands by name

Popular brands

Load more brands