9
96-8000 Rev AC
May 2010
Safety
.
d
eclaration
of
W
arninGS
, c
aUtionS
,
and
n
oteS
Throughout this manual, important and critical information is prefaced with the
word “Warning”, “Caution” and “Note”
Warnings
are used when there is an extreme danger to the operator and/or to
the machine. Take all steps necessary to heed the warning given. Do not con
-
tinue if you cannot follow the warning instructions. An example warning is:
WARNING! Never put hands between tool changer and spindle head.
Cautions
are used when there is the potential for minor personal injury or me-
chanical damage, for example:
CAUTION! Power down the machine before performing any maintenance tasks.
Notes
give additional information to the operator about a particular step or
procedure. This information should be taken into consideration by the operator
as the step is performed to ensure there is no confusion, for example:
NOTE: If machine is equipped with the optional extended Z-clearance
table, follow these guidelines:
Summary of Contents for 96-8000
