13. If the product will not be used for a long time, fold it down by pressing the folding
jack [5] with your foot. This will collapse the folding jack [5] and the extension jack
[5A] will slide in to allow the handrail to be lowered and folded down.
3.4.
Cleaning and maintenance
a)
Before cleaning, adjustment or replacement of accessories, and when the
appliance is not in use, unplug the power cord from the mains and wait for the
rotating parts come to a stop.
b)
Use non-corrosive agents only for cleaning the surfaces.
c)
After each cleaning, dry all components well before the appliance is used
again.
d)
Store the appliance in a dry and cool place, protected from moisture and direct
sunlight.
e)
Do not spray the appliance with a stream of water and do not immerse it in
water.
f)
Ensure that water will not enter through the ventilation ports in the housing.
Do not expose the display or the power (I/O) switch to any moisture.
g)
Clean the ventilation ports with a brush and compressed air.
h)
Regularly inspect the condition of the appliance for all defects.
i)
Fold down the handrail every time after training. Clean with a soft cloth with
some warm water and soap.
j)
Do not clean with any sharp and/or metal implements (e.g. a wire brush or a
metal scraper) as these may damage the surface of the appliance.
k)
Do not clean the unit with acidic substances, medical products, thinners, fuel,
oil or other chemicals as they may damage it.
l)
If the product will not be used for a long time, remove the emergency key and
fold the walking pad down.
3.4.1.
LUBRICATION
