GW Instek APS-1102A User Manual Download Page 63

Page: 63 / 285

PANEL AND BASIC OPERATIONS

APS-1102A

3-29



Operation steps

Select the icon in the SET menu corresponding to the desired setting, then set a numerical value.



Peak current limiter (positive):



Peak current limiter (negative):



RMS current limiter:

Press the

key to move the cursor to the

,or

icon.

ENTER

CANCEL

Cursor

Press the

EN TER

key to display the modification box.

ENTER

CANCEL

Modification box

Press the

and

keys to move the cursor to the digit to be changed, turn the MODIFY dial

and set a numerical value. The set value will be reflected in output immediately.

Increase

Decrease

Press the

CA NCE L

EN TER

key to close the modification box.

Summary of Contents for APS-1102A






























































































































































































































































































Search results

Summary of Contents for APS-1102A

Reviews:

GW Instek APS-1102A, User Manual, Page: 63 / 285

Search results

Summary of Contents for APS-1102A

Reviews: