GW Instek APS-1102A User Manual Download Page 207

Page: 207 / 285

REMOTE INTERFACE

APS-1102A

6-23



[SOURce:]SEQuence:CSTep?

This returns the step number being executed. The response ranges from



1 and 1 to 255.



1 is

returned in the idle mode.

Syntax:

[SOURce:]SEQuence:CSTep?

Parameters:

None

Query example:

SEQ:CST?

Response format:

<NR1>

Response example:



[SOURce:]SEQuence:LEN?

This returns the maximum number of sequence steps. 255 is always returned.

Syntax:

[SOURce:]SEQuence:LEN?

Parameters:

None

Query example:

SEQ:LEN?

Response format:

<NR1>

Response example:

255



[SOURce:]SEQuence:COUNt?

This returns the jump times of the step specified by SEQ:STEP. Response range of the number of

the jump times is -1 to 999. In the idle mode,



1 is returned.

Syntax:

[SOURce:]SEQuence:COUNt?

Parameters:

None

Query example:

SEQ:COUN?

Response format:

<NR1>

Response example:

Summary of Contents for APS-1102A






























































































































































































































































































Search results

Summary of Contents for APS-1102A

Reviews:

GW Instek APS-1102A, User Manual, Page: 207 / 285

Search results

Summary of Contents for APS-1102A

Reviews: