GW Instek APS-1102A User Manual Download Page 138

Page: 138 / 285

APS-1102A User Manual

APS-1102A

5-4

The following information is displayed in various parts of the screen.

A: Status window:

This window shows various status of the devices.

B: Message box:

When an error has occurred, a message box appears near the bottom of the

status window, and the cause is displayed. The message box is closed

automatically after 1.5 seconds. It is also used to indicate an overload, as

well as the progress of a sequence.

C: Measured value window: This window displays measured values.

When measuring the harmonic current, measured values are displayed in

the area combined C and D.

D: Menu window:

This window is used to enter settings.

E: Message display window: A warning message is displayed in this message window whenever there is

an error that requires confirmation by the user. The displayed information

remains until the ENTER key has been pressed.

Summary of Contents for APS-1102A






























































































































































































































































































Search results

Summary of Contents for APS-1102A

Reviews:

Brands by name

Popular brands

GW Instek APS-1102A, User Manual

Search results

Summary of Contents for APS-1102A

Reviews:

Brands by name

Popular brands