GVD M3 series, User Manual

Page: 166 / 197

Chapter 6 Configuration Mode
6-28 HD NVR User Manual
6-3-1-2 Modify an existing map
To modify a map file, see the following steps:
Figure 6-13 Modify an existing map
1.
In the configuration mode, click the ‘ System tab.
2.
Click ‘ HTML Maps ’ in the category panel.
3. Click the selected map.
4.
Click ‘ Modify ’ button to show the configuration page.
5. The configuration page has two tabs: the ‘ HTML ’ tab shows the content of the
map file, and the ‘ Configuration ’ tab allows the user to change the map name and
the file path. Make the desired changes in the ‘ Configuration ’ tab.
6.
Click ‘ Apply ’ to confirm the modification.
7.
Click ‘ OK ’ to close the configuration page.