GVD M3 series User Manual Download Page 72

Page: 72 / 197

Chapter 4

System Operation

4-24

HD NVR User Manual

4-5

Viewer

4-5-1 Brief of the Viewer

The viewer is the main operation unit of the HD NVR Manager. Not only the viewer

plays the live image from multiply ways, like general camera, PTZ camera, 180 or

360 degree IP Dome camera, sub channel, ROI, channel icon in the map, , but also the

viewer offers the functions of historical image playing, image seeking, retrieving, as

well as motion detection.

A viewer is composed of the channel image, the on -screen display (OSD), and four

indicators. When the user activates the sub channel or the ROI function, the viewer an

associated area in a colored rectangle will be showed in the viewer.

The following figure displays all relative details of the viewer.

Figure 4-18 Brief of the Viewer

NOTE: The viewer with the white frame in a pattern

is regarded as the active viewer.

The following section will introduc e all detailed functions of the viewer.

Summary of Contents for M3 series






































































































































































































Search results

Summary of Contents for M3 series

Reviews:

Related manuals for M3 series

Brands by name

Popular brands

GVD M3 series, User Manual

Search results

Summary of Contents for M3 series

Reviews:

Related manuals for M3 series

Brands by name

Popular brands