GVD M3 series, User Manual

Page: 154 / 197

Chapter 6 Configuration Mode
6-16 HD NVR User Manual
13.
If the camera supports the DI/DO points, the configuration page will show the
‘ Digital I/O ’ tab. Click ‘ Digital I/O ’ tab and check the checkboxes of ‘ Enable ’
options to add the DI/DO points. The user can also change the ‘ Mode ’ option to
control the DI/DO points if necessary.
14. Click ‘ OK ’ to complete.
TIP: How to set the motion alarm area (illustrated by Arecont ’ s 3130
model)
1.
In the configuration page, click the ‘ Motion ’ tab.
2. There is a green grid on the live image. Every cell in the grid
represents a detection area. Click the left key of the mouse to select
the area. Click the right key to deselect the area.
3.
Click ‘ OK ’ to close the configuration page.