GVD M3 series, User Manual

Page: 156 / 197

Chapter 6 Configuration Mode
6-18 HD NVR User Manual
4.
Click the ‘ Vendor ’ combo box and select the preferred vendor name from the
drop-down list. Click ‘ Search ’ to continue.
5. Click ‘ Search ’ . The system tries to connect the IP camera remotely.
6.
The system automatically searches all vendor ’ s connecting IP cameras in the
network. The searching result will be listed in the channel table.
7. Check the checkboxes of the selected cameras and click ‘ Install ’ .
8.
The new channel has been added to the camera tree. A ‘ Configuration page ’ shows
for changing the setting values of the camera.
9.
Refer to the steps 9-13 in section 6-1-2-2 ‘ Add a camera/channel to the system ’ for
the following steps. Click ‘ OK ’ to close the page.