GVD M3 series, User Manual

Page: 17 / 197

Chapter 2 Installation
HD NVR User Manual 2-7
2-1-2-2 HD NVR Enterprise (M6 series)
To install the HD NVR Enterprise, see the following steps (illustrated by the 3U
model):
Figure 2-6 Install the HD NVR Enterprise
1. Connect the keyboard to the keyboard input.
2.
Connect the mouse to the mouse input.
3.
Connect the VGA monitor to the DVI/VGA ports. (The number, type, and position
of DVI/VGA ports may vary by the models. )
4.
Plug in a CAT-6 UTP cable to the RJ-45 Gigabit LAN port with the green label,
and connect the other end of the cable to a hub or a switch IP cameras/video
servers have connected.
5.
Plug in the speaker to the speaker port if necessary.
6. Connect the power cord to the AC power socket at the rear panel of the unit. (The
number of power supply may vary by the models.) Once the power cord is pluged,
the machine boots automatically.